Project Description

PETG CarbonLook by ROSA3D was designed for printouts in which the visual effect of the object is more important than its industrial application.
A small addition of carbon fibers used in PETG Standard material results in print with a satin-like surface and hardly visible layers, with only a slight stiffening. A possibility of obtaining a delicate transparency in thin-walled prints is an additional advantage.
Printing with PETG CarbonLook is characterized by a low level of stringing and excellent layer adhesion. Obtaining amazing results is possible as easily as with PETG Standard filament. The material shows no shrinkage and doesn’t require a closed chamber. Due to a low content of carbon fibers in the material, its abrasion is lower than in case of PETG+CF, which translates into less wear on the printing nozzle.

Diameter

Diameter

1.75 mm

Net weight (g)

Net weight (g)

500g (vacuum packed with a moisture absorber)

Color

Color

APPLICATION

APPLICATION

Prototypes, housings / shades, decorative elements.

HOW TO PRINT

HOW TO PRINT

Recommended printing temperature 220 - 260 ° C.
Recommended table temperature: 60-80 °C.

TECHNICAL PARAMETERS

Diameter1.75 mm
Diameter tolerancy (mm)+/-0.05 mm
Oval tolerances (mm)+/-0.02 mm
Net weight (g)500g (vacuum packed with a moisture absorber)
Print temperature (°C)220-260 °C
Table temperature (°C)60-80 °C

PHYSICAL PARAMETERS

Density1,29 g/cm3
OdorOdorless
Tensile elongation5,5 %
Tensile strength (to break)47 MPa
Tensile modulus2980 MPa
Notched Izod impact strength4.7 kJ/m2
Vicat softening point78 °C