Project Description
PVB (polyvinyl butyral) filament from ROSA3D is a polymer that enables you to achieve impressive looking, transparent or very smooth prints.
The surface of the finished print can be smoothed with isopropyl alcohol. The ease of printing with PVB filament makes it suitable even for 3D printing beginners.
PVB is characterised by low shrinkage and lack of odour. Its mechanical properties rank between PET-G and PLA.
The possibility of achieving a smooth, transparent structure makes this filament perfect for printing a wide range of aeasthetically pleasing objects, such as vases, sculptures, or lampshades. After IPA smoothing, PVB figurines look as if they have been taken out of an injection mould.
PVB filament is highly hygroscopic therefore it should be stored in airproof container. To assure best possible print quality filament should be dryed ( 45°C, 4-8 h) before printing.
Diameter
Diameter
1.75 mmNet weight
Net weight
500 gColor
Color
GREAT PRECISION
NO ODOR
Logo ROSA3D widoczne przez jednowarstwowy wydruk z PVB w połowie wygładzony IPA
ROSA3D logo visible behind one layer PVB print smoothed in half with IPA
APPLICATION
APPLICATION
- lampshades
- containers and vases
- figurines and sculptures
- jewelery and ornaments
- other aesthetic objects
HOW TO PRINT
HOW TO PRINT
Recommended printing temperature: 200-225°C
Recommended table temperature: 65-75°C
Recommended cooling: 50-100%
Filament does not require a heated bed or chamber. In case of problems with adhesion, we recommend the use of an adhesive agent. It is recommended to enable print cooling. Fan speed should be adjusted according to printer capabilities and geometry of the printed object.
TECHNICAL PARAMETERS
| Diameter | 1.75 mm |
| Diameter tolerance | +/- 0.05 |
| Oval tolerance | +/- 0.02 |
| Net weight | 500 g |
| Print temperature | 200-225°C |
| Bed temperature | 65-75°C |
The test standards can be found in the filament technical data sheet (TDS).
PHYSICAL PARAMETERS
| Density | 1.09 g/cm3 |
| Odor | Odorless |
| Tensile modulus | 2500 MPa |
| Thermal deformation temperature | 55°C (HDT A, according to ISO 75) |
| Vicat softening point | 70°C |
| Charpy impact strength | without notch, 23°C: 106 kJ/m2; notched, 23°C: 2 kJ/m2 |
Files to download
