Project Description

ROSA-Flex 96A is a thermoplastic polyurethane. It is intended for intermediate users of 3D printers who want to start their adventure with printing from flexible materials. The ROSA-Flex 96A filament is hard enough to be printed even on printers with Bowden feeding. In addition, it does not require a closed chamber and will easily stick to many work surfaces (eg. glass, smooth PEI, textured PEI, alluminum).

ROSA-Flex 96A has excellent interlayer adhesion. Filament made of TPU will be perfect if you need elements resistant to chemical reagents and mechanical damage. Prints can be squeezed and stretched many times without permanently changing their original shape. You can print use it to print a protective case for your smartphone in one of the many vivid colors.

ROSA-Flex 96A is a durable technical material, resistant to oils, greases and many solvents. The complete chemical resistance table can be found in 'files to download' section.

What's more, ROSA-Flex 96A filament was made of components approved for contact with food, complying with FDA 21CFR177.2600 and the amendment of the Commission (EU) 10/2011. For products that come into contact with food, the certification lies with the manufacturer of the final product.

średnica

Diameter

Diameter

1.75 mm

Net weight (g)

Net weight (g)

500 g

Color

Color

Filament - plakietki

tyre, orange grips

TPU ORANGE & WHITE

PET-G STANDARD GRAY, PETG +CF

buty z drukarki 3D

TRANSPARENT

fot. Paweł Miciński 3DWayTech

Octopus blue orange transparent filament

TRANSPARENT, BLUE & ORANGE

carabiner, orange grips

TPU ORANGE & GRAY

PET-G STANDARD GRAY, PETG +CF

flex96 cable PM filament flex

TRANSPARENT

fot. Paweł Miciński 3DWayTech

flex96 cable PM_2

TRANSPARENT

fot. Paweł Miciński 3DWayTech

membrane, orange grips

TPU ORANGE & TRANSPARENT

PET-G STANDARD GRAY, PETG +CF

green, transparent, gray filament

GREEN, WHITE & GRAY

APPLICATION

APPLICATION

Hobby: smartphone cases, drone elements, elements for RC cars

Technical: gaskets, bumpers, anti-vibration dampers / feet, housings, orthoses

HOW TO PRINT

HOW TO PRINT

Recommended printing temperature 210-250°C
Recommended bed temperature: 50-70°C
Recommended print speed: 15-50 mm/s (we recommend starting slowly and gradually trying to increase the speed)
Recommended air supply: 0-100% (depends on the geometry of the model)
Recommended printing speed: 15-50 mm/s
Compatible work tables: glass, smooth PEI, textured PEI, alluminum.

Filament can be printed on printers with Direct and Bowden feeding. It does not require a closed chamber. The material has good adhesion to the above-mentioned working surfaces, but in case of problems, we recommend the use of adhesives.

TECHNICAL PARAMETERS

Diameter1.75 mm
Diameter tolerancy (mm)+/-0.05 mm
Oval tolerances (mm)+/-0.02 mm
Net weight (g)500 g
Print temperature (°C)210-250 °C
Table temperature (°C)50-70 °C

PHYSICAL PARAMETERS

Density1,22 g/cm3
OdorOdorless
Tensile elongation350 % (EN 12803)
Vicat softening point126°C (ISO 306)
Loading...